From October 22 to 24, 2026, Boyee Industrial will exhibit at the 2026 India Battery Expo, Booth No. 5.169.
At this exhibition, Boyee will present four complete production line solutions for the industrialization of new energy battery materials:
Oxide/sulfide solid-state electrolyte production lines, CVD silicon-carbon anode production lines, lithium iron phosphate production lines, and single-walled/multi-walled carbon nanotube conductive slurry production lines.
As battery material manufacturers move from laboratory validation and pilot-scale development toward commercial manufacturing, they face challenges involving equipment selection, process optimization, production line integration, and engineering delivery.
Boyee Industrial works with customers to address these requirements through integrated equipment and engineering solutions tailored to specific material systems, process routes, and production targets.
1. Exhibition Information
Exhibition Name: 2026 India Battery Expo
Dates: October 22–24, 2026
Venue: Greater Noida Exhibition Center, India
Boyee Booth: 5.169
Boyee will highlight its industrialization solutions for new energy materials, ranging from process validation and core equipment to turnkey EPC delivery.
2. Four Key Solutions
1）Solid-State Electrolyte Production Lines
For oxide and sulfide solid-state electrolyte materials, Boyee can provide complete production line solutions covering feeding, mixing, nano-grinding, conveying, heat treatment, and automation.
For sulfide-based solid-state electrolytes, production line configurations can incorporate controlled low-moisture and low-oxygen environments, sealed material conveying, safety interlocks, and exhaust gas treatment systems according to project requirements.
2） CVD Silicon-Carbon Anode Production Line
Focusing on the large-scale mass production of CVD silicon-carbon anodes materials, Boyee offers production line solutions ranging from unpacking and feeding, chemical vapor deposition (CVD), carbon coating, and post-treatment to complete system integration. Boyee provide equipment configuration, engineering design, and EPC delivery based on the customer’s process route, target production capacity, and project phase.
3） Lithium Iron Phosphate Production Line
Focusing on the large-scale production of lithium iron phosphate cathode materials, Boyee provides equipment configuration and complete line system integration for process stages including raw material handling, mixing, wet grinding, spray drying, sintering, crushing, batch blending, and packaging, along with automation and EPC engineering services.
4） Single-Walled/Multi-Walled Carbon Nanotube Conductive Slurry Production Line
For the preparation of SWCNT and MWCNT conductive slurries, Boyee provides turnkey solutions covering stages such as feeding, pre-dispersion, grinding and dispersion, homogenization, storage, and automatic filling, thereby enhancing slurry dispersion uniformity, production stability, and large-scale production capacity.
3. From Core Equipment to Turnkey EPC Delivery
As advanced battery materials move toward industrial-scale production, manufacturers need more than individual processing machines. They also need coordinated process engineering, reliable equipment integration, stable production operations, and effective project execution.
To address these needs, Boyee has established a comprehensive service capability spanning technical validation, core equipment manufacturing, production line design, automation control, and turnkey EPC delivery.
Depending on the project stage, we can provide: experimental equipment, pilot production lines, large-scale mass production lines, retrofitting of existing lines, and turnkey EPC delivery for entire production lines.
4. Key Topics for Discussion at India Battery Expo 2026
At the 2026 India Battery Expo, the Boyee team will focus on discussing the following projects with clients:
Industrialization solutions for oxide/sulfide solid-state electrolytes
Turnkey solutions for CVD silicon-carbon anode production lines
Production line solutions for lithium iron phosphate
CNT conductive slurry production lines
Equipment selection and process scale-up for new energy materials
Turnkey EPC and automation upgrades
If you are planning a new battery materials project, Boyee welcomes discussions about your material system, process flow, target production capacity, existing equipment, and project development stage.
These details help establish a more focused basis for equipment selection and production line planning.
5. Schedule a Meeting with Boyee Industrial
Date: October 22–24, 2026
Location: Greater Noida Exhibition Center, India
Booth: 5.169
We welcome clients in the new energy battery materials sector to visit our booth. By scheduling meetings in advance, Boyee will arrange targeted technical exchanges tailored to your material systems, production capacity, and project requirements.
6. Frequently Asked Questions
1） What is Boyee Industrial’s booth number at the 2026 India Battery Expo?
Boyee’s booth number is 5.169. The exhibition will take place from October 22 to 24, 2026.
2） What solutions will be highlighted at this event?
We will highlight four types of production line solutions: oxide/sulfide solid-state electrolytes, CVD silicon-carbon anodes, lithium iron phosphate, and CNT conductive pastes.
3） Does Boyee Industrial provide turnkey EPC services?
Yes. Boyee can provide core equipment, process optimization, engineering design, turnkey integration, automation, and EPC delivery services.
4） Do you support the transition from laboratory-scale to mass production?
Yes. We can provide solutions ranging from laboratory equipment to pilot production lines and mass production lines, tailored to the specific stage of each project.
